Red fixed low intensity type A and B
Part Number: 113939
NAVILITE-HI-230V
- Completely molded and perfectly waterproof with AC power supply installed below the light
- Bird spike
- No grounding issue, class II
- Total 192 leds wired in 48 independant circuits of 4 leds each
- Luminous intensity 3 times higher than ICAO/FAA
The NAVILITE HI 230VAC P/N113939 should be ordered with its stainless bracket P/N113920 for vertical or horizontal installation as per the drawing below
The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is 3 times much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.
Datasheet|
Wattage
|
12 W |
|
|
Current drawn
|
200mA |
|
|
Life time
|
~10years |
|
|
Main voltage
|
230VAC +/-10% |
|
IP degree
|
IP66 for the light and IP65 for the power supply |
|
|
Wiring
|
Terminal connection (2 power wires) |
|
|
Operating temperature
|
Tu | -40/+55°C |
|
Weight
|
1.91 kg |
|
|
Size of the light
|
194mm (height) x 63mm (over diameter) |
|
|
Cable entry quantity for power supply
|
2 |
|
|
Wire cross section
|
from 1 to 2,5 mm² |
|
|
Attachment
|
1 screw M5 provided |
|
Standards compliance
|
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017) |
|
Luminous intensity
|
|
|
|
Color night time
|
Red fixed |
|
|
Vertical beam spread
|
|
|
|
Horizontal beam spread
|
360° |
Select another reference:
Associated Products
