Reliability in
Part Number 113909I-KIT

Red fixed low intensity type A and B

  • The reference 113969-KIT include the Navilite lamp (113969) with a stainless steel bracket and cable gland (113928)
  • Light part completely molded with 4 levels of leds
  • Redundant circuits for LED’s : 16 circuits of 4 LEDs in redundancy
  • Surge protection and alarm included inside an aluminum red painted base
  • normally open and normally close both available for the alarm in compliance with FAA Engineering Brief 98
  • Provided with stainless bracket for mounting and hot-galvanized cable entry
  • Molded design with no loose parts during installation

The NAVILITE series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed to replace incandescent obstruction lights or for new installation. The NAVILITE is one piece molded which integrates 4 levels of LED and comes with wiring connectors or a molded cable.

Select another reference:

Luminous intensity
> 32cd
Color night time
Red fixed
Vertical beam spread
Horizontal beam spread
6 W
Current drawn
70 mA
Life time
Main voltage
110VAC to 240VAC +/-10% 50/60Hz
IP degree
On stripped wires 3x1,5mm² (2 power wires, 1 ground wire)
Operating temperature
Tu -40/+55°C
0.92 kg
Size of the light
Ø x h :63 x 169 (mm)
950 g
1 screw M5 provided
Standards compliance
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)