Filter
FILTER RESET

Low intensity (Red)
Junction box
Control Cabinet with photocell
Medium intensity (Red)
Photocell only

48VDC
120-240VAC

LED
Neon

Photocell to be ordered separately
Photosensor embedded

Red + infrared
Red

Volt-free contact (NO/NC both available)

Low intensity type A and B
Medium intensity type B or C

L-810 (150-5345-43J)
L-810 (150-5345-43H)
L-864 (150-5345-43J)

Stainless bracket
3/4 NPT threaded tube
Product Selection
113790RI-BASE-240-RG
Spare part for OFC
113790RR-BASE-240
Spare part for OFC
113790RW-BASE-048-G
Spare part for OFC
12V-SOLAR-KIT-10Wp-6Ah-N
12Vdc custom packaged solar kit including 10 watts peak solar panel with battery capacity 7Ah for NAVILITE-SOL with blinker for low intensity type E configuration
12V-SOLAR-KIT-20/50Wp-27/32Ah-N
12Vdc custom packaged solar kit including 20/30 watts peak solar panel with battery capacity 27/32Ah for NAVILITE-SOL or OFC 12V (the size of the solar panel and battery capacity depends on localisation)
12V-SOLAR-KIT-20Wp-18Ah-N
12Vdc custom packaged solar kit including 20 watts peak solar panel with battery capacity 18Ah for low intensity type A or B
12V-SOLAR-KIT-30Wp-60Ah
12Vdc solar kit 30/50 Watts peak with battery capacity 41/100Ah for OFC 12Vdc (to be ordered separately)
24V BATTERY CABINET 40AHSF (INPUT POWER 220VAC)
48Vdc battery cabinet thyristor type
24V OBSTAFLASH Xe CONVERTER
Spare parts for xenon strobe obstaflash
48/12V-SOLAR-KIT-20Wp-18Ah
48Vdc solar kit including 20 watts peak solar panel with battery capacity 18Ah for low intensity type A or B
48V BATTERY CABINET 12AHSF (INPUT POWER 220VAC)
48Vdc battery cabinet thyristor type
48V BATTERY CABINET 7AHSF (INPUT POWER 220VAC)
48Vdc battery cabinet thyristor type
48V NAV CTRL 12/24/48Vdc & 110/240Vac
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC red fixed low intensity with blinking infrared, operating at night only or continuously, plugged to work simultaneously with remote signalization in case of failure of the red or infrared circuits, or power supply
48V-BAT-12Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-12Ah-R
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-12Ah-R
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-18Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-18Ah-230-400V
48VDC UPS Battery Backup System powered through 180VAC to 550VCA 50/60Hz. This 48Vdc UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-18Ah-RW
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-18Ah-W
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-2,1Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-24Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-36Ah-Al
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-36Ah-RW
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-36Ah-W
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-36Ah-W-SIT
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-4,5Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-54Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-54Ah-RW
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-BAT-7Ah
48VDC UPS Battery Backup System powered through 110 to 240VAC (or 400VAC for some application). This UPS provides battery back-up in case of main power failure for our lights powered in 48Vdc The 4 batteries remain fully charged under normal AC power
48V-NAV-CMD-120/240
Monitoring box allowing the control of NAVILITE 48VDC beacon, working at night only or continuously, plugged to work simultaneously or in redundancy (a main light and a backup light working in case of failure of the main light) with remote signalization in case of failure of the light or he 230VAC supply. This monitoring box can also powered up to 4 NAVILITE 48VDC working simultaneously
48V-NAV-CTR-RI-48-IOT
Control cabinet for NAVILITE-IR-48V-CABLE
48V-NAV-CTR-RI-SOL-IOT
Control cabinet for NAVILITE-IR-48V-CABLE
48V-NAV-PW-240
Robust 230VAC to 48VDC converter for NAVILITE 48VDC
48V-SOLAR-KIT-360WP
48Vdc solar kit for red medium intensity obstaflash 48Vdc
48V-SOLAR-KIT-501/1500WP
48Vdc solar kit for day and night operating obstaflash 48Vdc
48V-SOLAR-KIT-630WP-90AH-240
48Vdc solar kit 630 Watts peak with battery capacity 90Ah for OFI360-RW-048 (to be ordered separately)
AC/DC control device
Low intensity type A and B (L-810 FAA 150/5345-43H)
ARMOR-RODS-Ø8.54-24.40
Armor Rods are recommended for the protection of conductors They protect conductors against bending, compression, abrasion etc. Armor Rods fit tightly the cable shape and prevent damage issue on conductors
AUXILIARY TUBING
AUXILIARY TUBING (CAPACITIVE)
AUXILIARY TUBING HOLDER
AUXILIARY TUBING HOLDER
Alimentation WDR 480W 48VDC
Spare part for battery cabinet
BAL-225-Ø25-32
Obstruction lighting system for high voltage lines, red fixed low intensity
BAL-225-Ø32-52
Obstruction lighting system for high voltage lines, red fixed low intensity
BAL-400-Ø25-32
Obstruction lighting system for high voltage lines, red fixed low intensity
BAL-400-Ø32-52
Obstruction lighting system for high voltage lines, red fixed low intensity
BAL-63-Ø19-25
Obstruction lighting system for high voltage lines, red fixed low intensity
BAL-63-Ø25-32
Obstruction lighting system for high voltage lines, red fixed low intensity
BALISOR LAMP B23 DERVAUX
BALISOR® lamp B23
BALISOR® CLAUDE B33 LAMP
BALISOR® lamp B33
BALISOR® CLAUDE B49 LAMP
BALISOR® lamp B49 model 00618
BASE
Base for inset TLOF
BATTERIE PBE 12V 12Ah (1162DI)
Spare part for led lights
BATTERIE S12/27 G5 12VDC 27Ah
Spare part for solar kit
BDS-W/R/O/Y-Ø12.6/26.4
The Bird Diverter Spiral is designed to make overhead lines visible to birds and provides an economic means of reducing the hazard to both lines and birds. It can be installed on conductors up to 132KV, guard cables, guyes structures visible to birds and for high voltages, it is used on the earth wire.
BDS-W/R/O/Y-Ø9,5/32,10
This bird flight diverter is designed to make overhead lines and guy structures visible to birds and provides an economical means of reducing the hazard to both lines and birds. For low and medium voltage construction, the BIRD-FLIGHT Diverter is applied to the phase conductors (bare or jacketed). For high voltages, it is used on the shield wire.
BRACKET-2-NAVILITE
Led low intensity type B
Balisor B115 110KV to 130KV
Obstruction lighting system for high voltage lines, red fixed low intensity
Balisor B132 130KV to 160KV
Obstruction lighting system for high voltage lines, red fixed low intensity
Balisor B220 210KV to 360KV
Obstruction lighting system for high voltage lines, red fixed low intensity
Balisor B380 360KV and more
Obstruction lighting system for high voltage lines, red fixed low intensity
Batterie 12V 18Ah LEAD CRYSTAL
Spare part for led lights
C1 CAPA 4µF 77-3911 AMI
Spare part for xenon lights
CABLE-4G1.5-UO D13.1
Shielded cable
CABLE-5G1.5-SO D13.3
Shielded cable
CABLE-7G1-SO-D12.3
Interconnecting cable between a flash-head OFP-120-RW-JB and an obsta power supply (100 meters max)
CABLE-7G1.5-SO D14.2
Interconnecting cable between a flash-head OFP-120-RW-JB and an obsta power supply (100 meters max)
CABLE-OFP-6P-RW
Interconnecting cable between a junction box OFP-JB-8P-RW and an obsta power supply for 6 dual color projectors
CABLE-OFP-6P-RW-10S
Interconnecting cable between obsta power supply and junction box OFP-JB-6P-RW-L P/N113748 or OFP-JB-6P-RW-H P/N113748H
CABLE-OFP-6P-RW-1S
Interconnecting cable between obsta power supply and junction box OFP-JB-6P-RW-L P/N113748 or OFP-JB-6P-RW-H P/N113748H
CAPACITOR 100µF
Spare parts for xenon strobe obstaflash
CAPACITOR 25µF
Spare parts for xenon strobe obstaflash
CELLULE 500LUX 48V
Photocell for day-twilight intensity change in accordance with ICAO and FAA for all OBSTA 48Vdc lights or for the change of color and light-intensity of the led obstaflash series
CHARGEUR SL 6A 48V
Spare part for led lights
CLAMP 00637
OBSTA CLAMP
CLAMP SYST B
CLAMP SYST B
CLAUDE 5S 00656
OBSTA obstruction lights
CLAUDE HI 00653
OBSTA obstruction lights
CLAUDE HIG 00654
OBSTA obstruction lights
COLLIER HI+HI-STI
Spare part for obsta lights
COMMAND CARD 48VDC CRESP NUIT
Spare part for led lights
COMMAND CARD 48VDC JOUR
Spare part for led lights
COMMAND-CARD-48VDC-6P-RW
Spare part for led lights
COMMAND-CARD-48VDC-6P-RW-USA-43G
Spare part for led lights
COMMAND-CARD-48VDC-6P-RW-USA-43H
Spare part for led lights
COMMAND-CARD-48VDC-6P-RW-USA-43J
Spare part for led lights
COMMAND-CARD-48VDC-8P
Spare part for led lights
COMMAND-CARD-CONVERSION-KIT
Spare part for led lights
CONTROL DEVICE 113965IR
Low intensity type A and B (L-810 FAA 150/5345-43J)
CONVERTER 230VAC TO 48V-600W
Spare part for led lights
Carte RVU
Spare part for battery cabinet
Converter DC/DC
Spare part for led lights
DISL PROTEC. CORONA
DISL PROTEC. CORONA
Diode anti-retour
Spare part for battery cabinet
Effaroucheur
This bird diverter is designed to increase the visibility of overhead lines and reduce the incidence of bird collisions with overhead cables. Extensive field studies have shown that when installed properly diverters significantly decrease bird strikes.
FAA L-810 LIGHT BODY
Low intensity type A and B (L-810 FAA 150/5345-43J)
FAA-OFC-ADAPTATOR
Holder for OFC
FAULT TRANSMITTER CARD
Spare part for led lights
FAULT TRANSMITTER CARD
Spare part for led lights
GPS-24/48
Synchronisation interface using the GPS clock
GPS-24/48-I-V2
Synchronisation interface using the GPS clock
GPS-ANTENNA
Synchronisation interface using the GPS clock
GRASILIGHT
Heliport flood light
Guide carte (la paire)
Spare part for battery cabinet
HEL-CAB-240
110VAC to 240VAC stainless power cabinet for TLOF
HELITE-G-24
Touchdown and lift-off area lighting (TLOF)
HELITE-G-24-KIT
Touchdown and lift-off area lighting (TLOF)
HELITE-G-I-240
Touchdown and lift-off area lighting (TLOF)
HELITE-G-I-Controller
Controller for inset Touchdown and lift-off area lighting (TLOF)
HI_HOLDER_WITH_ADJUSTABLE_ANGLE
Adjustable vertical holder for high intensity flash-head
HRP-150 48
Spare part for led lights
HRP-300 48
Spare part for battery cabinet
HVLite15
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
HVLite19
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
HVLite23
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
HVLite27
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
HVLite31
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
HVLite34
Obstruction lighting system for high voltage lines, red fixed low intensity with IR
Harnes Wire Kit 113792A
Spare part for led lights
Harness wire kit 1 block
Spare part for led lights
IMPULSE TRANSFORMER
Spare parts for xenon strobe obstaflash
INSULATOR
SILICONE INSULATOR
INSULATOR
INSULATOR FOR BALISOR
ISOLATING ANTI VIBRATION
INSOLATING ANTI VIBRATION
Interconnection card
Spare part for led lights
K2/4 RELAIS H.T. 77-2013 BHI
Spare part for xenon lights
KIT-MODEM-IOT
Monitoring web interface of obstruction lighting systems for Obsta customers and administrators
LAMP END SUSPENDER
LAMP END SUSPENDER FOR BALISOR LAMP
LAMP HOLDER
LAMP HOLDER
MSB10-230/OBSTA
Spare part for led lights
NAV-BLK-12
12VDC blinker for NAVILITE 12Vdc (20fpm) Low intensity type E for temporary obstacle light
NAV-CMD-12V
12VDC command box for 2 NAVILITE-SOL P/N113903 in the configuration 'main and back-up'. This command box allows automatic switch from the main light to the back-up light in case of failure of the main light
NAV-CMD-48
Monitoring box allowing the control and the wiring of 2 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-CMD-48-B
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or 2 in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-CMD-48-WITH EXTERNAL PHOTOCELL 13133
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or 2 in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-CMD-SOL
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or 2 in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-HI-CMD-48
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or 2 in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-HI-CMD-48-WITH EXTERNAL PHOTOCELL 13133
Monitoring box allowing the control and the wiring of 1 to 4 NAVILITE 48VDC beacons, operating at night only or continuously, plugged to work simultaneously or 2 in redundancy (a main light and a backup light working only in case the main light is not working) with remote signalization in case of failure of the light or failure of the 48VDC supply
NAV-JB-3
Junction box fully wired for 1 or 2 lights with 4 wires all voltage
NAV-JB-3-AL
Junction box fully wired for 1 or 2 lights with 4 wires
NAV-JB-8
Availability:
€76.00 (excl. tax)

Available within 3 weeks

NAVILITE 12V SOLAR
Led low intensity type A
NAVILITE 12V SOLAR CABLE
Led low intensity type A
NAVILITE B 13950
L-810 (FAA 150/5345-43G)
NAVILITE-120-240V
Red fixed low intensity type A and B
NAVILITE-120-240V-KIT
Availability:
€365.00 (excl. tax)

Available within 3 weeks

NAVILITE-230V
Red fixed low intensity type A and B
NAVILITE-240I
Red fixed low intensity type A
NAVILITE-240I-KIT
Red fixed low intensity type A and B
NAVILITE-24V
Red fixed low intensity type A and B
NAVILITE-24V-CABLE
Red fixed low intensity type A and B
NAVILITE-48V
Red fixed low intensity type A and B
NAVILITE-48V-CABLE
Red fixed low intensity type A and B
NAVILITE-48V-CABLE-1
Spare part for led lights
NAVILITE-48V-CABLE-KIT
Availability:
€255.00 (excl. tax)

Available within 3 weeks

NAVILITE-48V-CMD
Red fixed low intensity type A and B
NAVILITE-48V-CMD-KIT
Availability:
€280.00 (excl. tax)

Available within 3 weeks

NAVILITE-CABLE-CLAMP
Support for one NAVILITE on ground cable
NAVILITE-F-120-240V
Availability:
€250.00 (excl. tax)

Available within 3 weeks

NAVILITE-F-120-240V-DUAL
Double steady-burning light NAVILITE-F-120-240V should be installed when used as a top light in areas or locations where the failure of a single unit could cause an obstruction to be totally unlighted
NAVILITE-F-120-240V-KIT
Availability:
€265.00 (excl. tax)

Available within 3 weeks

NAVILITE-F-48V
Availability:
€240.00 (excl. tax)

Available within 3 weeks

NAVILITE-F-48V-DUAL
Double steady-burning light NAVILITE-F-120-240V should be installed when used as a top light in areas or locations where the failure of a single unit could cause an obstruction to be totally unlighted
NAVILITE-F-48V-KIT
Availability:
€255.00 (excl. tax)

Available within 3 weeks

NAVILITE-FAA-48V_Spare
Low intensity type A and B (L-810 FAA 150/5345-43H)
NAVILITE-HI-12V
Red fixed low intensity type A and B
NAVILITE-HI-230V
Red fixed low intensity type A and B
NAVILITE-HI-230V-KIT
Red fixed low intensity type A and B
NAVILITE-HI-24V
Led low intensity type B
NAVILITE-HI-48V
Red fixed low intensity type A and B
NAVILITE-HI-48V-CABLE
Red fixed low intensity type A and B
NAVILITE-HOLDER
Holder for one NAVILITE and a junction or a command box
NAVILITE-IR-240VAC-KIT
Led navilite low intensity type A and B with IR visible by Night vision goggles. The NAVILITE-IR-48V includes 2 "de-coupled" visible and infrared circuits compliant with most of Aviation Authorities in Europe. The infrared part can be fixed or blinking as per the directive AD I-006 F from OFAC in Switzerland
NAVILITE-IR-48V-CABLE
Led navilite low intensity type A and B with IR visible by Night vision goggles. The NAVILITE-IR-48V includes 2 "de-coupled" visible and infrared circuits compliant with most of Aviation Authorities in Europe. The infrared part can be fixed or blinking as per the directive AD I-006 F from OFAC in Switzerland
NAVILITE-IR-F-048
Availability:
€460.00 (excl. tax)

Available within 3 weeks

NAVILITE-IR-F-048-KIT
Red light FAA L-810 as per FAA (AC 150/5345-43J)
NAVILITE-IR-F-048-KIT-TE
Red light FAA L-810 as per FAA (AC 150/5345-43J)
NAVILITE-IR-FAA-120-240V
Red light FAA L-810 ETL FAA (AC 150/5345-43J) listed and ICAO low intensity type A, B or E
NAVILITE-IR-FAA-120-240V-DUAL
Double steady-burning light NAVILITE-F-120-240V should be installed when used as a top light in areas or locations where the failure of a single unit could cause an obstruction to be totally unlighted
NAVILITE-IR-FAA-120-240V-KIT
Availability:
€415.00 (excl. tax)

Available within 3 weeks

NAVILITE-IR-NPT-48V
Led navilite low intensity type A and B with IR visible by Night vision goggles. The NAVILITE-IR-48V includes 2 "de-coupled" visible and infrared circuits compliant with most of Aviation Authorities in Europe. The infrared part can be fixed or blinking as per the directive AD I-006 F from OFAC in Switzerland
NAVILITE-L810-HOLDER
Support for one NAVILITE L-810 P/N113969, 113965 or 113969IR and cable gland. This kit is required in case of absence of rigid conduit 3/4NPT supporting the light
OBSTA HI STI 110-240 VAC
Cold neon discharge low intensity type B and FAA L-810 (FAA AC 150/5345-43G) devoted to the night marking of all kind of obstacles supplied by 110 to 240VAC
OBSTA HI STI-240V
Cold neon discharge low intensity type B and FAA L-810 (FAA AC 150/5345-43G) devoted to the night marking of all kind of obstacles supplied by 110 to 240VAC
OBSTA HI STI-240V-APR
Cold neon discharge low intensity type B
OBSTA STI 48V
Cold neon discharge low intensity type A devoted to the night marking of all kind of obstacles supplied by a standalone DC power source in 48VDC
OBSTA STI 48V DC
Cold neon discharge low intensity type A devoted to the night marking of all kind of obstacles supplied by a standalone DC power source in 48VDC
OBSTA STIF 12V
Cold neon discharge low intensity type A devoted to the night marking of all kind of obstacles supplied by a standalone DC power source in 12VDC
OBSTA VSTI 48V
OBSTA obstruction lights
OBSTA-SERVER
Monitoring web interface of obstruction lighting systems for Obsta customers and administrators
OBSTA-XE-R-24 13821
Xenon medium intensity type B compliant with ICAO medium intensity type B and compliant with FAA AC 150/5345-43G including a flashhead and a power supply (300m max)
OBSTA-XE-R-240 13811
Xenon medium intensity type B compliant with ICAO medium intensity type B and compliant with FAA AC 150/5345-43G including a flashhead and a power supply (300m max)
OBSTA-XE-RW-24 13822
Xenon dual color medium intensity type A and B compliant with ICAO and compliant with FAA L-865/L-864 including a flashhead and a power supply (300m)
OBSTA-XE-WW-24 13820
Xenon medium intensity type A compliant with ICAO and compliant with FAA AC 150/5345-43G including a flashhead and a power supply (300m max)
OBSTALINK-DC
This IOT gateway is designed to monitor and control aviation warning lights remotely on a dedicated web server. This IOT gateway is compatible with most of aviation warning lights on the market This controller allows to have a diagnostic remotely on a web server
OF360-R-240
Red OBSTAFLASH medium intensity NVG compatible (infrared night vision goggles) and FAA L-864 certified
OF360-RW-240
Dual color OBSTAFLASH medium intensity type A and B or C
OF360-RW-240
Dual color medium intensity OFP-360-RW-JB P/N 113731JB and complete remote power supply OFP-CAB-1B-RW-240-4M32-S P/N 114111
OF360-RW-240-U
Dual color medium intensity NVG compatible (infrared night vision goggles) and FAA L-865/L-864 certified
OF360-WW-240-U
White OBSTAFLASH medium intensity type A 110-240VAC and FAA L-865 certified (Intertek)
OFC-CTR-048
Monitoring and control box
OFC-CTR-048-1G
Monitoring and control box
OFC-CTR-048-G
Monitoring and control box
OFC-CTR-048-G-KIT
Availability:
€1,950.00 (excl. tax)

Available within 3 weeks

OFC-CTR-240
Monitoring and control box
OFC-CTR-240-G
Monitoring and control box
OFC-CTR-240-G-KIT
Availability:
€2,050.00 (excl. tax)

Available within 3 weeks

OFC-CTR-5E-3F-5A-240-P
Monitoring and control box
OFC-CTR-5E-3F-5A-240-P-RAL7035
Monitoring and control box
OFC-CTR-6E-3F-6A-240
Monitoring and control box
OFC-CTR-SOL-1G
Monitoring and control box
OFC-HOLDER-TUBE
Holder for OFC
OFC-HOLDER-TUBE-114
Holder for OFC
OFC-PCBa-CMD-048
Spare part for led lights
OFC-PCBa-CMD-240
Spare part for led lights
OFC-RI-048
Availability:
€1,350.00 (excl. tax)

Available within 3 weeks

OFC-RI-048-G
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-048-R
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-048-RG
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-048-TE
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-240
Availability:
€1,350.00 (excl. tax)

Available within 3 weeks

OFC-RI-240-G
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-240-R
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-240-RG
Red medium intensity FAA L-864 (AC 150/5345-43J) ETL certified
OFC-RI-SOL
Medium intensity type B
OFC-RI-SOL-G
Medium intensity type B
OFC-RI-SOL-R
Medium intensity type B
OFD-RW-048
Dual color medium intensity NVG compatible (infrared night vision goggles) Comply with ICAO medium intensity dual color type A and B
OFD-RW-240
Dual color medium intensity NVG compatible (infrared night vision goggles) Comply with ICAO medium intensity dual color type A and B
OFH-120-RW-240
Led high intensity type A
OFH-120-RW-240B
Led high intensity type A (flash-head OFP-FH-RW-120-6P P/N 114601 + power supply OFP-CAB-1B-RW-240-8M16 code 114113) - Compliant with high intensity type A (ICAO annex 14 chapter 6) - This obstruction light could be also configured as a medium intensity type B or C during night time with IR.
OFH-120-WW-240
Led high intensity type A - Compliant with high intensity type A (ICAO annex 14 chapter 6)
OFH-120-WW-240-6
Led high intensity type A
OFH-120-WW-240-B
Led high intensity type A - Compliant with high intensity type A (verified by the Civil Aviation laboratory STAC in France)
OFH-120-WW-240-B48
Led high intensity type A - Compliant with high intensity type A
OFH-120-WW-240-B48-APR
Led high intensity type A - Compliant with high intensity type A
OFH-120-WW-240-U
High intensity OFH 270K L-856 (certification pending) dedicated to obstacle such as chimneys and towers higher than 213m
OFH-180-WW-048-G-2
Led high intensity type B - Compliant with high intensity type B according to ICAO annex 14 chapter 6 (edition July 2018) - To be used on the support of the transmission line in case it is not possible to install day warning spheres on the cables (3 levels of 2 lights on opposite side of the tower supporting power cables)
OFH-CTR
Controler for high intensity led lights
OFH-CTR-CAN
Controller for high intensity and white or dual color medium intensity obstruction light system This controller allows to have at the bottom of the obstacle a precise diagnostic of obstruction lights on the tower and remotely on a web server.
OFH-CTR-CAN
Controller for high intensity and white or dual color medium intensity obstruction light system This controller allows to have at the bottom of the obstacle a precise diagnostic of obstruction lights on the tower and remotely on a web server.
OFH-CTR-G
Controler for high intensity led lights
OFI-CAB-12P-2E-RW-240
110VAC to 240VAC stainless power cabinet for 2 dual color or white/white OBSTAFLASH 48VDC P/N113792 or P/N113791
OFI-CAB-12P-2E-RW-BAT
Battery cabinet 12 hours back-up for 2 dual color OBSTAFLASH 48VDC P/N113792U or 113791U
OFI-CAB-1E-RW-240
110VAC to 240VAC stainless power cabinet for 48Vdc obstaflash dual color or white/white obstaflash kits (max current output 10A)
OFI-CAB-1E-RW-240-U
110VAC to 240VAC stainless power cabinet for 48Vdc obstaflash dual color kits (max 20A)
OFI-CAB-1E-RW-BAT
Stainless control and battery cabinet to be used with any OBSTAFLASH 48VDC or OBSTA STI 48VDC
OFI-CAB-1E-W-048
Stainless control cabinet to be used with OBSTAFLASH OFI360-RW-048 operating during daytime only with NAVILITE 48Vdc working at night only
OFI-CAB-1E-W-240
Stainless control cabinet to be used with OBSTAFLASH OFI360-RW-048 operating during daytime only with NAVILITE 48Vdc working at night only
OFI-CAB-1E-W-BAT
Stainless control and battery cabinet to be used with OBSTAFLASH P/N113792U working during day time only with low intensity working during night time only
OFI-CAB-24P-4E-RW-240
110VAC to 240VAC stainless power cabinet for 4 dual color or white/white OBSTAFLASH 48VDC P/N113792 or P/N113791
OFI120-R-048
Red medium intensity NVG compatible (infrared night vision goggles) and FAA L-864 certified including 3 flashheads OBSTAFLASH 120° especially designed for obstacle such as stacks with a diameter of 6 meters maximum and 3 legs based pylons
OFI120-R-240
Red medium intensity NVG compatible (infrared night vision goggles) and FAA L-864 certified including 3 flashheads OBSTAFLASH 120° especially designed for obstacle such as stacks with a diameter of 6 meters maximum and 3 legs based pylons
OFI120-R-48/240
Red medium intensity NVG compatible (infrared night vision goggles) and FAA L-864 certified including 3 flashheads OBSTAFLASH 120° especially designed for obstacle such as stacks with a diameter of 6 meters maximum and 3 legs based pylons
OFI120-RW-048
Dual color medium intensity type A and B system
OFI120-RW-048-U
Dual color medium intensity system FAA L-865/L-864 ETL certified
OFI120-RW-240
Dual color medium intensity type A and B system
OFI120-RW-240-UA
Dual color medium intensity system FAA L-865/L-864 ETL certified
OFI120-RW-48/240
Dual color medium intensity type A and B system
OFI120-RW-48/240-U
Dual color medium intensity system FAA L-865/L-864 ETL certified
OFI120-WW-048-U
White medium intensity system FAA L-865 ETL certified
OFI120-WW-240-U
White medium intensity system FAA L-865 ETL certified
OFI120-WW-48/240-U
White medium intensity system FAA L-865 ETL certified
OFI360-RW-048
Dual color OBSTAFLASH medium intensity type A and B or C
OFI360-RW-048
Dual color medium intensity NVG compatible (infrared night vision goggles) Comply with ICAO medium intensity dual color type A and B
OFI360-RW-048-G
Dual color OBSTAFLASH medium intensity type A and B or C
OFI360-RW-048-U
Dual color medium intensity FAA L-865/L-864 ETL certified
OFI360-RW-240
Dual color OBSTAFLASH medium intensity type A and B or C
OFI360-RW-240
Dual color OBSTAFLASH medium intensity type A and B or C
OFI360-RW-240-CAN
Dual color OBSTAFLASH medium intensity type A and B or C
OFI360-RW-240-U
Dual color medium intensity FAA L-865/L-864 ETL certified
OFI360-RW-240I
Dual color medium intensity type A and B (or C) 110-240VAC
OFI360-WW-048
Led medium intensity white - Compliant with medium intensity type A - Day and night operation or day only operation
OFI360-WW-048-G
Led medium intensity white - Compliant with medium intensity type A - Day and night operation or day only operation
OFI360-WW-048-U
Medium intensity type A and FAA L-865 ETL certified
OFI360-WW-240-AOL
OFI360-WW-240-U
White medium intensity system FAA L-865 ETL certified
OFI360-WW-240I-G
Dual color medium intensity type A and B (or C) 110-240VAC
OFP-120-R
The red medium intensity type B or C flashhead OBSTAFLASH120 is designed for night marking of obstacle such as stacks, intermediate pylons with 3 legs, facade of high rise buildings. A system that includes 3 red OBSTAFLASH120 120° around the obstacle and an OBSTA power cabinet complies with ICAO red medium intensity type B (or type C, CAA) and FAA L-864.
OFP-120-R-10
The red medium intensity type B or C flashhead OBSTAFLASH120 is designed for night marking of obstacle such as stacks, intermediate pylons with 3 legs, facade of high rise buildings. A system that includes 3 red OBSTAFLASH120 120° around the obstacle and an OBSTA power cabinet complies with ICAO red medium intensity type B (or type C, CAA) and FAA L-864.
OFP-120-R-JB
The red medium intensity type B or C flashhead OBSTAFLASH120 is designed for night marking of obstacle such as stacks, intermediate pylons with 3 legs, facade of high rise buildings. A system that includes 3 red OBSTAFLASH120 120° around the obstacle and an OBSTA power cabinet complies with ICAO red medium intensity type B (or type C, CAA) and FAA L-864.
OFP-120-RW-10
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-10L
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-10L-U
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-15
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-2-HIA
Spare part for led lights
OFP-120-RW-2B-HIA
Spare part for led lights
OFP-120-RW-2L-HIA
Spare part for led lights
OFP-120-RW-2L-HIA-L6
Spare part for led lights
OFP-120-RW-3
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-6-HIA
Spare part for led lights
OFP-120-RW-JB
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-JB-U
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-JBL
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-120-RW-XL
This OBSTAFLASH120 ou 180 dual color medium intensity type A and B (or C) is designed for day and night marking of obstacle such as chimneys, pylons and high rise buildings (3 or more lights are required per level depending on diameter of the obstacle)
OFP-180-R-JB
The red medium intensity flashhead OBSTAFLASH180 is designed for night marking of obstacle such as large stacks, intermediate pylons with 4 legs, facade of high rise buildings. A system that includes at least 2 OBSTAFLASH180 around the obstacle and an OBSTA power cabinet complies with ICAO red medium intensity and with FAA L-864.
OFP-180-RW-JB
The dual color medium intensity flashhead OBSTAFLASH180 is designed for day and night marking of obstacle such as large stacks, intermediate pylons with 4 legs, facade of high rise buildings. A system that includes minimum 2 OBSTAFLASH180 around the obstacle and an OBSTA power cabinet complies with ICAO dual color medium intensity and with FAA L-865/L-864.
OFP-360-FW-JBH
Led medium intensity dual color flashhead LS140 type - Compliant with medium intensity type A during the day - Compliant with Feuer W, rot during the night - Verified by the Ministry of transportation in Germany for Medium intensity type A during the day and Feuer W, rot during the night
OFP-360-FW-JBHx2+OFP-CAB-12P-2E-FW-BAT-G
Obstruction lighting systems including 2 dual color medium intensity (MI type A daytime + W-Rot night time)
OFP-360-R-JB
Red OBSTAFLASH medium intensity flashhead including 6 red led projectors and a junction box to be used with the external obsta power cabinet. The complete product P/N113724 (flashhead P/N113736 + power supply P/N113727) is compliant with ICAO medium intensity type B or C and certified with FAA L-864
OFP-360-RW-JB
Dual color medium intensity including 6 dual color led projectors. This flash-head must be powered through a complete external obsta power supply through a shielded cable 18G1,5
OFP-360-RW-JBL
Dual color medium intensity including 6 led projectors P/N113761 and a junction box P/N113748 to be used with complete external obsta power supply P/N113733 or P/N113737 (option with batteries)
OFP-CAB-12P-2E-R-240
110VAC to 240VAC stainless power cabinet for 2 obstaflash P/N113736 (or 12 red projectors)
OFP-CAB-12P-4E-RW-240
110VAC to 240VAC stainless power cabinet for 4 obstaflash dual color P/N113738
OFP-CAB-12P-6E-R-240
110VAC to 240VAC stainless power cabinet for 6 obstaflash OFP-120-R-JB
OFP-CAB-12P-6E-WW-240
230VAC Power supply for 6 whilte flashheads OBSTAFLASH120 P/N113747M
OFP-CAB-16P-12E-R-240-CG32
110Vac to 240Vac stainless power cabinet for 8 red OBSTAFLASH120 and 8 NAVILITE 48Vdc
OFP-CAB-16P-8E-R-240
110Vac to 240Vac stainless power cabinet for 8 red OBSTAFLASH120 OFP-120-R-JB and NAVILITE 48Vdc
OFP-CAB-18P-3E-R-240
110VAC to 240VAC stainless power cabinet for 3 obstaflash P/N113736 (or 18 red projectors)
OFP-CAB-1B-RW-048-4M32
Spare part for led lights
OFP-CAB-1B-RW-048-4M32-S
Spare part for led lights
OFP-CAB-1B-RW-048-8M16
Spare part for led lights
OFP-CAB-1B-RW-048-8M16-S
Spare part for led lights
OFP-CAB-1B-RW-240-4M32
Spare part for led lights
OFP-CAB-1B-RW-240-4M32-S
110VAC to 240VAC stainless power and control cabinet for OBSTA flash-head
OFP-CAB-1B-RW-240-8M16
Spare part for led lights
OFP-CAB-1B-RW-240-8M16-S
110VAC to 240VAC stainless power and control cabinet for OBSTA flash-head
OFP-CAB-2B-RW-048-4M40
Spare part for led lights
OFP-CAB-2B-RW-048-6M25
Spare part for led lights
OFP-CAB-2B-RW-240-4M40
Spare part for led lights
OFP-CAB-2B-RW-240-6M25
Spare part for led lights
OFP-CAB-36P-12E-R-240
110VAC to 240VAC stainless power cabinet for 12 flashheads red medium intensity P/N113745
OFP-CAB-3B-RW-048-4M40
Spare part for led lights
OFP-CAB-3B-RW-240-3M40
Spare part for led lights
OFP-CAB-4B-RW-240-4M40
Spare part for led lights
OFP-CAB-6P-1E-R-048
48Vdc stainless power cabinet for one obstaflash P/N113736 (or 6 red projectors with junction box P/N113753)
OFP-CAB-6P-1E-R-240
110VAC to 240VAC stainless power cabinet for one obstaflash P/N113736
OFP-CAB-6P-1E-R-BAT
Stainless power cabinet for one red obstaflash P/N113736 (or 6 red color projectors + junction box 113753) with 12 hours back-up in case of failure of main power supply
OFP-CAB-6P-1E-RW-240
110VAC to 240VAC stainless power cabinet for 6 dual color projectors through a junction box (medium intensity type A during daytime & B/C during night time)
OFP-CAB-6P-1E-RW-240-U
110VAC to 240VAC stainless power cabinet for 6 dual color projectors through a junction box (medium intensity type A during daytime & B/C during night time)
OFP-CAB-6P-1E-RW-BAT
Stainless power cabinet for one obstaflash P/N113731 (or 6 dual color projectors) with 12 hours back-up in case of failure of main power supply
OFP-CAB-6P-1E-W-BAT
OFP-CAB-6P-2E-RW-240
110VAC to 240VAC stainless power cabinet for 2 obstaflash dual OFP-180-RW-JB
OFP-CAB-6P-3E-RW-048
48Vdc stainless power cabinet for 3 obstaflash OFP-120-RW-JB
OFP-CAB-6P-3E-RW-240
110VAC to 240VAC stainless power cabinet for 3 obstaflash dual color OFP-120-RW-JB
OFP-CAB-6P-L-RW-048
48Vdc stainless power cabinet with 6 plugs for 6 dual color projectors P/N113747
OFP-CAB-6P-L-RW-240
110VAC to 240VAC stainless power cabinet with 6 plugs for 6 dual color projectors P/N113761
OFP-CAB-8P-1E-R-240
110VAC to 240VAC stainless power cabinet for up to 8 red projectors
OFP-CAB-8P-1E-RW-048
Stainless power cabinet for 4 obstaflash OFP-120-RW and junction box OFP-JB-8P-RW (medium intensity type A during daytime & B/C during night time)
OFP-CAB-8P-1E-RW-240
Stainless power cabinet for 4 obstaflash OFP-120-RW and junction box OFP-JB-8P-RW (medium intensity type A during daytime & B/C during night time)
OFP-CAB-8P-1E-RW-240-HIA
Spare part for led lights
OFP-CAB-8P-4E-R-240
110VAC to 240VAC stainless power cabinet for 4 flashheads red medium intensity OFP-120-R-JB
OFP-CAB-8P-4E-RW-048
110VAC to 240VAC stainless power cabinet for 4 obstaflash dual color OFP-120-RW-JB
OFP-CAB-8P-4E-RW-240
110VAC to 240VAC stainless power cabinet for 4 obstaflash dual color OFP-120-RW-JB
OFP-CAB-8P-4E-RW-240U
110VAC to 240VAC stainless power cabinet for 4 obstaflash dual color OFP-120-RW-JB-U
OFP-CAB-8P-L-WW-240-HIA
Spare part for led lights
OFP-CAB-9P-3E-RW-240
110VAC to 240VAC stainless power cabinet for 3 obstaflash dual color OFP-180-RW-JB
OFP-FH-RW-120-6P
Spare part for led lights
OFP-JB-2P-R
Junction box for 2 led projectors 113760
OFP-JB-3P-R
Junction box to connect 3 red projectors code 113760
OFP-JB-3P-RW
Junction box to connect 2 or 3 dual color projectors to an obsta power unit
OFP-JB-5-N
Junction box fully wired up to 4 red lights with relays for night only operation and de-activation of alarms during day time
OFP-JB-6P-R
Junction box to connect up to 6 red projectors P/N 113760 (or 3 flash-heads OFP-120-R-X) to an obsta power supply
OFP-JB-6P-RW-H
Molded junction box to connect 6 dual color projectors with harting connector P/N 113761H or P/N113761HG to an interconnecting cable P/N113762LX (X length of the cable in meter)
OFP-JB-6P-RW-L
Molded junction box to connect 6 dual color projectors with connector P/N 113761 to an interconnecting cable P/N113762
OFP-JB-8-AL
Junction box fully wired for 5 cables each with 8 wires max
OFP-JB-8-AL-TE
Junction box fully wired for 5 cables each with 8 wires max
OFP-JB-8P-RW
Junction box to connect up to 8 dual color projectors (or up to 8 red medium intensity flash-heads OFP-120-R-JB or OFP-180-R-JB) to a remote obsta power supply
OFP-JB-R-6M16-M32
Junction box to connect up to 6 red projectors P/N 113760 (or 3 flash-heads OFP-120-R-X) to an obsta power supply
OFP-JB-RW-3M16-M32
Junction box to connect 2 or 3 dual color projectors to an obsta power unit
OFP-L-MALE-CONNECTOR
Spare part for led lights
PCB MASTER CARD UNICOLOR
Spare parts for xenon strobe obstaflash
PCB WITH FUSE FOR OBSTAFLASH XENON
Spare parts for xenon strobe obstaflash
PCB-GPS
Synchronisation interface using the GPS clock
PCBa CMD Navilite L810(F)
Low intensity type A and B (L-810 FAA 150/5345-43J)
PCBa OFP MI CAN Extension Card
Spare part for led lights
PHOTOCELL 500/50LUX 120VAC
Photocell for day/twilight and twilight/night change of light output in accordance with ICAO to be used with the high intensity type A
PHOTOCELL 500/50LUX 48VDC
Photocell for day/twilight and twilight/night change of light output in accordance with ICAO to be used with the high intensity type A
PHOTOCELL 50LUX 230VAC
Photocell for night only operation for all OBSTA 230Vac
PHOTOCELL 50LUX 24VDC
Photocell for night only operation for all OBSTA 24Vdc lights or for the change of color & intensity twilight/night of the XENON obstaflash series
PHOTOCELL 50LUX 48VDC
Photocell for twilight-night intensity change in accordance with ICAO and FAA for all OBSTA 48Vdc lights or for the change of color and light-intensity of the led obstaflash series
PHOTOCELL AC
Calibrated ambient sensor (photocell) for twilight-night intensity change in accordance with ICAO and FAA for all OBSTA lights or for the change of color and light-intensity
PHOTOCELL AC KIT
Availability:
€280.00 (excl. tax)

Available within 3 weeks

PHOTOCELL DC
Calibrated ambient sensor (photocell) for twilight-night intensity change in accordance with ICAO and FAA for all OBSTA lights or for the change of color and light-intensity
PHOTOCELL NIGHT 77-3259 CHI
Photocell for night only operation for all OBSTA 120Vac
PHOTOCELL-DC-KIT
Availability:
€280.00 (excl. tax)

Available within 3 weeks

PHOTOCELL-HOLDER
Support for one photocell and a derivation box P/N 113946
PIED HELITE-G-24
Holder for one elevated TLOF
POWER CARD 48VDC
Spare part for led lights
POWER CARD B 48VDC
Spare part for led lights
POWER SUPPLY 230VA 600W
Spare part for led lights
PROJECTOR-R-0.75
Spare part for led lights
PROJECTOR-R-0.75
Spare part for led lights
PROJECTOR-R-10
Spare part for led lights
PROJECTOR-RW-0.75
Spare part for led lights
PROJECTOR-RW-0.75L
Spare part for led lights
PROJECTOR-RW-10L
Spare part for led lights
PROJECTOR-RW-2B
Spare part for led lights
PROJECTOR-RW-2L
Spare part for led lights
PROJECTOR-RW-3
Spare part for led lights
PROJECTOR-RW-4
Spare part for led lights
Photocell 230V AC
Photocell for night only operation for all OBSTA 230Vac
Photocell 48VDC
Photocell for twilight-night intensity change in accordance with ICAO and FAA for all OBSTA 48Vdc lights or for the change of color and light-intensity of the led obstaflash series
Photores
Spare part for OFC
Pont de diode
Spare part for battery cabinet
RED OBSTA XENON FLASHHEAD ONY
Spare parts for xenon strobe obstaflash
REGULATOR VICTRON PWM LIGHT 12/24 - 5A
Spare part for solar kit
REGULATOR VICTRON PWM LIGHT 12/24 - 5A
Spare part for solar kit
RELAY CR-P048DC2
Spare part for battery cabinet
Relay K1-K2
Spare part for battery cabinet
S112 18Ah G6
Spare part for battery cabinet
SHUNT BRAID
SHUNT BRAID
SHUNT BRAID
SHUNT BRAID
SIMPLIFIED HOLDER
SIMPLIFIED HOLDER
SPHERE600-AL-O-ø14,0-17,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø17,6-19,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø19,6-22,8
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø22,9-24,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø24,8-28,4
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø28,5-30,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-O-ø30,8-33,1
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø14,0-17,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø17,6-19,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø19,6-22,8
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø22,9-24,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø24,8-28,4
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø28,5-30,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø30,8-33,1
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø36,7-40,1
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø43,8-45,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø51,7-53,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-R-ø58,4-59,8
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø14,0-17,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø17,6-19,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø19,6-22,8
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø22,9-24,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø24,8-28,4
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø28,5-30,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø30,8-33,1
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø36,7-40,1
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø43,8-45,7
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø51,7-53,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-AL-W-ø58,4-59,8
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations.
SPHERE600-O-Ø12,5-18,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-O-Ø18,5-24,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-O-Ø24,5-30,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-O-Ø30,5-36,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-O-Ø36,5-42,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-O-Ø6,5-12,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø12,5-18,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø18,5-24,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø24,5-30,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø30,5-36,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø36,5-42,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-R-Ø6,5-12,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-RW-Ø12,5-18,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø12,5-18,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø18,5-24,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø24,5-30,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø30,5-36,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø36,5-42,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SPHERE600-W-Ø6,5-12,5
The obsta spherical markers are compliant with International Civil Aviation Organisation (ICAO) annex 14 chapter 6 recommendations. They are used for day marker for meteorogical towers (guyed structures), ground cable on transmission lines etc
SQUARE
Spare part for led lights
STAINLESS BRACKET 1 OBSTA STI/HISTI
Support for one OBSTA HI STI or OBSTA STI
STAINLESS BRACKET 2 OBSTA STI/HISTI & JUNCTION BOX
Support for 2 OBSTA HI STI of OBSTA STI with junction box
STI-ADAPTATOR
Support for one NAVILITE L-810 P/N113969, 113965 or 113969IR and cable gland
STI-AL-48
Monitoring and control box
STI-CMD-240
Monitoring and control box
STI-CMD-48
Monitoring and control box
SUPPORT CABINET TUBE
Spare part for led lights
SUPPORT OFC HORIZONTAL LEG
Holder for OFC
SUPPORT OFI360 & OFC TUBE Ø114
Spare part for led lights
SUPPORT OFI360 & OFC TUBE Ø70
Spare part for led lights
SUPPORT OFP-120
Spare part for led lights
SUPPORT OFP-120 TUBE
Spare part for led lights
SUPPORT-TUBE
Tube support
SUSPENS SOUPLE 46221
FLEXIBLE CONNECTOR FOR BALISORS B132 B115 AND B90
SYNCHRONISATION CARD
Spare parts for xenon strobe obstaflash
Solar panel 10Wp
Spare part for solar kit
Solar panel 20Wp
Spare part for solar kit
Solar panel 30Wp
Spare part for solar kit
TRIGGER BOARD
Spare parts for xenon strobe obstaflash
TUBE A ECLAT 12S 00602 BMI 13630
Spare part for xenon lights
UNIVERSAL HOLDER
Spare part for led lights
WHITE OBSTA XENON FLASHHEAD ONY
Spare parts for xenon strobe obstaflash
WIND CONE
For airports, helipads, hospitals, highways... Totally innovative and patented concept design. In use in all Europe and Africa. Approved by professional pilots for its higher visibility and security in all climate and meteorological conditions.
WIND SOCK
Wind sock spart part
XE FLASHTUBE DRAWER 13840
Spare parts for xenon strobe obstaflash
carte-A2
Spare part for battery cabinet