Red light FAA L-810 as per FAA (AC 150/5345-43J)

NAVILITE-IR-F-048

Part Number 113965IR

L-810 type red fixed with IR emissions (or L-810 (F) mimic with L-864 medium intensity) depending on internal switches positions
ICAO low intensity type A B or E with IR depending on internal switches positions
Light part fully molded with 8 levels of leds
Redundant circuits for LED’s with de-coupled IR
Surge protection and alarm included
normally open and normally close both available for the alarm complying with FAA Engineering Brief 98
2 x ¾”NPT threaded holes for mounting (or with the "NAVILITE-L810-HOLDER" and standard cable entry in absence of FAA rigid conduit)
monobloc design with no loose part during installation
Built-in flasher (activated through dip-switches with master/slave possibility) to mimic with L-864 medium intensity P/N113790RI-240, P/N113756U & P/N113714U or dual color L-865/L-864 medium intensity P/N113725UI, P/N113715U & P/N113758U,

Select another reference:

NAVILITE 12V SOLAR CABLE

NAVILITE-230V

NAVILITE-240I

NAVILITE-24V-CABLE

NAVILITE-48V

NAVILITE-48V-CABLE

NAVILITE-F-120-240V

NAVILITE-F-48V

NAVILITE-IR-F-048

Electrical Properties Mechanical Properties Norms Photometric Properties

Life time		~10years
Main voltage		20-60Vdc
Average wattage		8W (steady mode) or 2W (@ 30 fpm mimic with L-864)

IP degree		IP65 in vertical position
Wiring		Terminal connection (2 power wires and 2 for the alarm)
Operating temperature	Tu	-40/+55°C
Weight		1.15 kg
Cable entry quantity for power supply		2
Wire cross section		from 1 to 2,5 mm²
Attachment		2 NPT threaded holes

Standards compliance

ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), UK MOD, Transport Canada

Associated Products

Description: Red light FAA L-810 as per FAA (AC 150/5345-43J)
Characteristics: - L-810 type red fixed with IR emissions (or L-810 (F) mimic with L-864 medium intensity) depending on internal switches positions - ICAO low intensity type A B or E with IR depending on internal switches positions - Light part fully molded with 8 levels of leds - Redundant circuits for LED’s with de-coupled IR - Surge protection and alarm included - normally open and normally close both available for the alarm complying with FAA Engineering Brief 98 - 2 x ¾”NPT threaded holes for mounting (or with the "NAVILITE-L810-HOLDER" and standard cable entry in absence of FAA rigid conduit) - monobloc design with no loose part during installation - Built-in flasher (activated through dip-switches with master/slave possibility) to mimic with L-864 medium intensity P/N113790RI-240, P/N113756U & P/N113714U or dual color L-865/L-864 medium intensity P/N113725UI, P/N113715U & P/N113758U,
Standards compliance: ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), UK MOD, Transport Canada