Red fixed low intensity type A and B

NAVILITE-120-240V-KIT
Part Number 113908-KIT
NAVILITE-120-240V-KIT
Availability:
€510.00 (excl. tax)
Add to cart
  • Completely molded and perfectly waterproof NAVILITE-48V
  • Bird spike
  • Total 64 leds wired 4 by 4 in active redundancy
  • configuration as low intensity type B or low intensity type E
  • Power supply with photocell, alarm and surge protection included
  • Possibility to connect 1 to 3 additional NAVILITE-48V working simultaneously or 1 additional NAVILITE-48V in back-up (this second lamp is normally off and switch on in case of failure of the main lamp)

The bracket "NAVILITE-HOLDER" for the NAVILITE and its command box is included

Contact Us
The NAVILITE series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed to replace incandescent obstruction lights or for new installation. The NAVILITE is one piece molded which integrates 4 levels of LED and comes with wiring connectors or a molded cable.
Select another reference:
NAVILITE-120-240V-KIT
NAVILITE-48V-CABLE-KIT
NAVILITE-48V-CMD-KIT
NAVILITE-F-120-240V-DUAL
NAVILITE-F-120-240V-KIT
NAVILITE-F-48V-DUAL
NAVILITE-F-48V-KIT
NAVILITE-IR-F-048-KIT
NAVILITE-IR-FAA-120-240V-DUAL
NAVILITE-IR-FAA-120-240V-KIT
Luminous intensity

32cd
Color night time

Red fixed
Vertical beam spread

10°
Horizontal beam spread

360°
Wattage

6 W
Current drawn

70 mA
Life time

~10years
Main voltage

110VAC to 240VAC +/-10% 50/60Hz
IP degree

IP66 for the light and IP65 for the power supply
Wiring

Terminal connection (2 power wires + ground)
Operating temperature
 Tu

-40/+55°C
Weight

2.5 kg
Size of the light

112mm (height) x 63mm (over diameter)
Weight

1,8 kg
Cable entry quantity for power supply

2
Wire cross section

from 1 to 2,5 mm²
Attachment

1 screw M5 provided
Standards compliance

ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)