Red fixed low intensity type A and B

NAVILITE-48V-CMD-KIT

Part Number 113908-048-KIT

Completely molded and perfectly waterproof NAVILITE-48V
Bird spike
Total 64 leds wired 4 by 4 in active redundancy
configuration as low intensity type B or low intensity type E
Power supply with photocell, alarm and surge protection included
Possibility to connect 1 to 3 additional NAVILITE-48V working simultaneously or 1 additional NAVILITE-48V in back-up (this second lamp is normally off and switch on in case of failure of the main lamp)

The bracket "NAVILITE-HOLDER" for the NAVILITE and its command box is included

The NAVILITE series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed to replace incandescent obstruction lights or for new installation. The NAVILITE is one piece molded which integrates 4 levels of LED and comes with wiring connectors or a molded cable.

Select another reference:

Electrical Properties Mechanical Properties Norms Photometric Properties

Luminous intensity		> 32cd
Color night time		Red
Vertical beam spread		>10°
Horizontal beam spread		360°

Wattage		6 W
Current drawn		500 mA (4 NAVILITE-48V max)
Life time		~10years
Main voltage		48VDC (-10%; +15%)

IP degree		IP66 for the light and IP65 for the power supply
Wiring		Terminal connection (2 power wires + ground)
Operating temperature	Tu	-40/+55°C
Size of the light		112mm (height) x 63mm (over diameter)
Weight		1,8 kg
Cable entry quantity for power supply		2
Wire cross section		from 1 to 2,5 mm²
Attachment		1 screw M5 provided

Standards compliance

ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)