Dual color medium intensity type A and B (or C) 110-240VAC

OFI360-RW-240I
Part Number 113792-240-G
OFI360-RW-240I

110-240VAC flashhead including

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red with infrared circuit inside each projector
  • NVG visible
  • Simple installation with no losing parts when opening the flash-head
  • Normally open or normally close relay in case of lamp default or power supply
  • Communication capabilities (controller, Modbus TCP)
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • type 2 surge protection with indicator showing when it has failed included
  • GPS controlled or activated in case of failure or absence of an external controller or/and photocell
Contact Us
The obstaflash system dual color or white only provides a day and night marking solution for all kind of obstacle higher than 45 meters as per ICAO (or 61 meters as per FAA). For obstacle below 150 meters the use of white or dual color flashing light medium intensity type A during day time eliminates the need to paint the obstacle with red and white stripes
Select another reference:
OFI360-RW-048
OFI360-RW-048-U
OFI360-RW-240I
OFI360-WW-048-U
IR intensity and wavelength
 > 600mW/sr @ 800-900nm
Effective light output day time at 0° on site
 20 000cd (white)
Effective light output twilight mode at 0° on site
 20 000cd (white)
Effective light output night mode at 0° on site
 2000cd (red) with IR
Color day/twilight time
 white
Color night time
 Red
Vertical beam spread
 >3°
Horizontal beam spread
 360°
Intensity @ -10% to the ground
 3% of max
Flash per minute
 20, 30, 40 or 60 flashes per minute
Main voltage
 110VAC to 240VAC +/-10% 50/60Hz
Average wattage
 55W (day time), 8W (night mode)
IP degree
 IP66 per projector
Wiring
 Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature
 Tu -40/+55°C
Weight
 20 kg
Size of the light
 333mm (height) x 500mm (diameter)
Weight
 19kg for flashhead
Cable entry diameter
 11 to 21mm
Wire cross section
 from 1 to 4 mm²
Attachment
 6 mounting holes dia.16mm, dia.337mm circle (FAA standard)
Standards compliance
 ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)
Associated Products
OFH-CTR-CAN