Reliability in
Obstruction
lighting
OFI360-RW-240-CAN
Part Number 113725IA-CAN

Dual color OBSTAFLASH medium intensity type A and B or C

OFI360-RW-240-CAN

Flashhead

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red and infrared circuit inside each projector
  • Simple installation with no losing parts when opening the flash-head
  • Normally open or normally close relay in case of lamp default or power supply
  • Communication capabilities (controller, Modbus TCP)
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • 48Vdc surge protection with indicator showing when it has failed included
  • GPS controlled or activated in case of failure or absence of an external controller or/and photocell

Power supply

  • 'Weather tight' stainless steel 316L power cabinet enclosure
  • Connection to the controller OFH-CTR-CAN

The obstaflash system dual color L-865/L-864 or white only L-865 provides a day and night marking solution for all kind of obstacle higher than 61 meters as per FAA. For obstacle below 213 meters the use of white or dual color flashing lights L-865/L-864 during day and twilight time eliminate the need to paint the obstacle with red and white stripes

Select another reference:

Effective light output day time at 0° on site
20 000cd (white)
Effective light output twilight mode at 0° on site
20 000cd (white)
Effective light output night mode at 0° on site
2000cd (red) with IR
Color day/twilight time
white
Color night time
Red
Vertical beam spread
>3°
Horizontal beam spread
360°
Flash per minute
20, 30, 40 or 60 flashes per minute
Main voltage
110VAC to 240VAC +/-10% 50/60Hz
Average wattage
55W (day time), 8W (night mode)
IP degree
IP66 per projector
Wiring
Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature
Tu -40/+55°C
Weight
24 kg
Size of the light
333mm (height) x 500mm (diameter)
Size of the power supply
400mm (height) x 300mm (width) x 200mm (dept)
Weight
14kg for flashhead, 10kg for power cabinet
Wire cross section
from 1 to 4 mm²
Attachment
6 mounting holes dia.16mm, dia.337mm circle (FAA standard)
Standards compliance
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)
Associated Products