Reliability in
Part Number 113939-KIT

Red fixed low intensity type A and B

  • Completely molded and perfectly waterproof with AC power supply installed below the light
  • Bird spike
  • No grounding issue, class II
  • Total 192 leds wired in 48 independant circuits of 4 leds each
  • Luminous intensity 3 times higher than ICAO/FAA

The NAVILITE HI 230VAC P/N113939-KIT is provided with a stainless bracket for vertical or horizontal installation as per the drawing below

The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is 3 times much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.

Select another reference:

Luminous intensity
> 90 Cd
Color night time
Red fixed
Vertical beam spread
Horizontal beam spread
12 W
Current drawn
Life time
Main voltage
230VAC +/-10%
IP degree
IP66 for the light and IP65 for the power supply
Terminal connection (2 power wires)
Operating temperature
Tu -40/+55°C
0.92 kg
Size of the light
194mm (height) x 63mm (over diameter)
950 g
Cable entry quantity for power supply
Wire cross section
from 1 to 2,5 mm²
1 screw M5 provided
Standards compliance
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)