Reliability in
Obstruction
lighting
OFI360-WW-240I-G
Part Number: 113791-240-G

Dual color medium intensity type A and B (or C) 110-240VAC

OFI360-WW-240I-G

110-240VAC flashhead including

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red circuit inside each projector
  • Simple installation with no losing parts when openning the flashhead
  • led drivers inside a stainless enclosure located in flashhead
  • Alarm contact in case of lamp failure or power supply failure
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • type 2 surge protection

The obstaflash system dual color or white only provides a day and night marking solution for all kind of obstacle higher than 45 meters as per ICAO (or 61 meters as per FAA). For obstacle below 150 meters the use of white or dual color flashing light medium intensity type A during day time eliminates the need to paint the obstacle with red and white stripes


Effective light output day time at 0° on site 20 000cd (white)
Effective light output twilight mode at 0° on site 20 000cd (white)
Effective light output night mode at 0° on site 2000cd (white)
Color day/twilight time white
Color night time Red
Vertical beam spread >3°
Horizontal beam spread 360°
Intensity @ -10% to the ground 3% of max
Flash per minute 20, 30, 40 or 60 flashes per minute
Mains voltage 110VAC to 240VAC +/-10% 50/60Hz
Average power consumption 55W (day time), 8W (night mode)
IP degree IP66 per projector
Wiring Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature Tu -40/+55°C
Size of the light 333mm (height) x 500mm (diameter)
Weight 14kg for flashhead
Cable entry diameter 11 to 21mm
Wire cross section from 1 to 4 mm²
Attachment 6 mounting holes dia.16mm, dia.337mm circle
Standards compliance ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017)