OFI360-RW-240
Part Number 113725IA
Dual color OBSTAFLASH medium intensity type A and B or C
Flashhead
- 6 led projectors in aluminium and glass
- 2 white led circuits and a red and infrared circuit inside each projector
- Simple installation with no losing parts when opening the flash-head
- Normally open or normally close relay in case of lamp default or power supply
- Communication capabilities (controller, Modbus TCP)
- Test button for day and night
- Luminous indicators for quick diagnostic
- 48Vdc surge protection with indicator showing when it has failed included
- GPS controlled or activated in case of failure or absence of an external controller or/and photocell
Power supply
- 'Weather tight' stainless steel 316L power cabinet enclosure
Datasheet
The obstaflash system dual color L-865/L-864 or white only L-865 provides a day and night marking solution for all kind of obstacle higher than 61 meters as per FAA. For obstacle below 213 meters the use of white or dual color flashing lights L-865/L-864 during day and twilight time eliminate the need to paint the obstacle with red and white stripes
Select another reference:
|
Effective light output day time at 0° on site
|
20 000cd (white) | |
|
Effective light output twilight mode at 0° on site
|
20 000cd (white) | |
|
Effective light output night mode at 0° on site
|
2000cd (red) with IR | |
|
Color day/twilight time
|
white | |
|
Color night time
|
Red | |
|
Vertical beam spread
|
>3° | |
|
Horizontal beam spread
|
360° | |
|
Flash per minute
|
20, 30, 40 or 60 flashes per minute |
|
Main voltage
|
110VAC to 240VAC +/-10% 50/60Hz | |
|
Average wattage
|
55W (day time), 8W (night mode) |
|
IP degree
|
IP66 per projector | |
|
Wiring
|
Entry of cable by glands nickel plated brass and connection by terminals | |
|
Operating temperature
|
Tu | -40/+55°C |
|
Weight
|
24 kg | |
|
Size of the light
|
333mm (height) x 500mm (diameter) | |
|
Size of the power supply
|
400mm (height) x 300mm (width) x 200mm (dept) | |
|
Weight
|
14kg for flashhead, 10kg for power cabinet | |
|
Wire cross section
|
from 1 to 4 mm² | |
|
Attachment
|
6 mounting holes dia.16mm, dia.337mm circle (FAA standard) |
|
Standards compliance
|
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017) |
Associated Products
