OFI120-RW-48/240
Part Number 113758
Dual color medium intensity type A and B system
3 flashheads OFP-120-RW-10L with :
- 2 led projectors IP66
- Aluminium and glass enveloppe
- Vertical stainless support
A power supply :
- Stainless enclosure with interlock switch and cable entry at the bottom
- Surge protection included
- Alarm relay in case of projector failure or power supply failure
- Test button with auto/day/night modes
- 8 led indicators for easy diagnostic
- Possibility to connect intermediate red lights operating at night only
Datasheet
Dual color medium intensity FAA L-865/L-864 including 3 OBSTAFLASH120 flashheads.
Comply with ICAO medium intensity dual color type A and B. As per FAA white flashing lights L-865 used for daytime and twilight marking are recommended for obstacle exceeding 61 meters high
Select another reference:
|
Effective light output day time at 0° on site
|
20 000cd (white) | |
|
Effective light output twilight mode at 0° on site
|
20 000cd (white) | |
|
Effective light output night mode at 0° on site
|
2000cd (red) with IR | |
|
Color day/twilight time
|
white | |
|
Color night time
|
Red | |
|
Vertical beam spread
|
>3° | |
|
Horizontal beam spread
|
360° with minimum 3 flashheads fixed at 120° around the obstacle | |
|
Intensity @ -10% to the ground
|
3% of max | |
|
Flash per minute
|
20, 30, 40 or 60 flashes per minute |
|
Main voltage
|
110VAC to 240VAC +/-10% 50/60Hz | |
|
Average wattage
|
55W (day time), 8W (night mode) |
|
Wiring
|
For each projector, 10 meters of molded cable with connector For power supply, 1 plug per projector + entry of power & signal cable by glands nickel plated brass and connection by terminals | |
|
Operating temperature
|
Tu | -40/+55°C |
|
Size of the light
|
120mm (height) x 480mm (width) | |
|
Size of the power supply
|
400mm (height) x 300mm (width) x 200mm (dept) | |
|
Weight
|
3,5kg |
|
Standards compliance
|
ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017) |
Associated Products
