Reliability in
Obstruction
lighting
OFI120-RW-048-U
Part Number: 113712U

Dual color medium intensity system FAA L-865/L-864 ETL certified

OFI120-RW-048-U

3 flashheads OFP-120-RW-10L-U with :

  • 2 led projectors IP66
  • Aluminium and glass enveloppe
  • Vertical stainless support

Power supply :

  • Stainless enclosure with interlock switch and cable entry at the bottom
  • Surge protection included
  • Alarm relay in case of projector failure or power supply failure
  • Test button with auto/day/night modes
  • 8 led indicators for easy diagnostic
  • Top sync for optional side lights L-810(L)(F) NAVILITE-IR-FAA-120-240V P/N 113969IR
Contact Us
Dual color medium intensity FAA L-865/L-864 including 3 OBSTAFLASH120 flashheads. Comply with ICAO medium intensity dual color type A and B. As per FAA white flashing lights L-865 used for daytime and twilight marking are recommended for obstacle exceeding 61 meters high
Effective light output day time at 0° on site 20 000cd (white)
Effective light output twilight mode at 0° on site 20 000cd (white)
Effective light output night mode at 0° on site 2000cd (red)
Color day/twilight time white
Color night time Red
Vertical beam spread >3°
Horizontal beam spread 360° with minimum 3 flashheads fixed at 120° around the obstacle
Intensity @ -10% to the ground 3% of max
Flash per minute 40/30 as per FAA
Main voltage 48VDC -5%/+15% (max current 14A)
Average wattage 55W (day time), 8W (night mode)
Wiring For each projector, 10 meters of molded cable with connector For power supply, 1 plug per projector + entry of power & signal cable by glands nickel plated brass and connection by terminals
Operating temperature Tu -40/+55°C
Size of the light 120mm (height) x 480mm (width)
Size of the power supply 400mm (height) x 300mm (width) x 200mm (dept)
Weight 4kg
Standards compliance ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), EB-98 , CARs
Certification ETL listed FAA (AC 150/5345-43J)
Associated Products
SUPPORT OFI120
48V-BAT-18Ah-RW