NAVILITE-120-240V
Part Number: 113908
Led navilite low intensity type A and B
- Completely molded and perfectly waterproof
- Bird spike
- Total 64 leds wired 4 by 4 in active redundancy
- configuration as low intensity type B or low intensity type E
- Power supply with photocell, alarm and surge protection included
- Possibility to connect 1 to 3 additional NAVILITE-48V working simultaneously or 1 NAVILITE-48V in back-up on the same power supply
The NAVILITE series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed to replace incandescent obstruction
lights or for new installation. The NAVILITE is one piece molded which integrates 4 levels of LED and
comes with wiring connectors or a molded cable.
Select another reference:
Luminous intensity | >32cd | |
Color night time | Red fixed | |
Vertical beam spread | >10° | |
Horizontal beam spread | 360° |
Wattage | 6 W | |
Current drawn | 70 mA | |
Life time | ~10 years | |
Main voltage | 110VAC to 240VAC +/-10% 50/60Hz |
IP degree | IP66 for the light and IP65 for the power supply | |
Wiring | Terminal connection (2 power wires + ground) | |
Operating temperature | Tu | -40/+55°C |
Size of the light | 112mm (height) x 63mm (over diameter) | |
Weight | 1,8 kg | |
Cable entry quantity for power supply | 2 | |
Wire cross section | from 1 to 2,5 mm² | |
Attachment | 1 screw M5 provided |
Standards compliance | ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017) |