Reliability in
Part Number 113935IR

Red fixed low intensity with IR

  • Completely molded and perfectly waterproof
  • Bird spike
  • No grounding issue, class II
  • Total 176 red leds + 16 IR leds wired independently with circuits of 4 leds each
  • Luminous intensity much higher than ICAO/FAA requirements
  • IR as per FAA

For vertical or horizontal installation, the stainless bracket P/N113920 as per drawing below should be added

The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is 3 times much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.

Select another reference:

Luminous intensity
> 80 Cd
Color night time
Red fixed
Vertical beam spread
Horizontal beam spread
12 W
Current drawn
250 mA
Life time
Main voltage
48Vdc ± 10%
IP degree
On stripped wires (molded cable lenght 35cm) (2 power wires)
Operating temperature
Tu -40/+55°C
Size of the light
194mm (height) x 63mm (over diameter)
950 g
1 screw M5 provided
Standards compliance
ICAO annex 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017), infrared as per intensity defined by FAA EB-98-NVG
Associated Products