Reliability in
Part Number: 113791U

White type A medium intensity 48Vdc and FAA L-865 certified (Intertek)


48VDC flashhead

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red circuit inside each projector
  • Simple installation with no losing parts when openning the flashhead
  • 48VDC led drivers inside a stainless enclosure located in flashhead
  • Alarm contact in case of lamp failure or 48V power supply failure
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • 48Vdc surge protection with indicator showing when it has failed included
  • GPS (-G) in option

The obstaflash system whitel color or white only provides a day and night marking solution for all kind of obstacle higher than 45 meters. For obstacle below 150 meters the use of white or dual color flashing light medium intensity tye A during day time eliminate the need to paint the obstacle with red and white stripes)

Effective light output day time at 0° on site 20 000cd (white)
Effective light output twilight mode at 0° on site 20 000cd (white)
Effective light output night mode at 0° on site 2000cd (white)
Color day/twilight time white
Color night time White
Vertical beam spread >3°
Horizontal beam spread 360°
Intensity @ -10% to the ground 3% of max
Flash per minute 40
Mains voltage 48VDC -10%/+15% (max current 14A)
Average power consumption 55W (day time), 8W (night mode)
IP degree IP66 per projector
Wiring Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature Tu -40/+55°C
Size of the light 333mm (height) x 500mm (diameter)
Weight 14kg for flashhead
Cable entry diameter 11 to 21mm
Wire cross section from 1 to 16 mm²
Attachment 6 mounting holes dia.16mm, dia.337mm circle
Standards compliance ICAO annex 14 chapter 6, FAA (AC 150/5345-43H), EASA, DGAC, CAA (CAP 168)
Certification FAA (AC 150/5345-43H)
Associated Products