Reliability in
Part Number 113792U

Dual color medium intensity FAA L-865/L-864 ETL certified


48VDC flashhead

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red & infrared circuit inside each projector
  • Simple installation with no losing parts when openning the flashhead
  • 48VDC led drivers inside a stainless enclosure located in flashhead
  • Alarm in compliance with FAA Engineering Brief 98
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • 48Vdc surge protection with indicator showing when it has failed included
  • Top sync for synchronization with side lights L-810(L)(F) NAVILITE-IR-FAA-120-240V P/N 113969IR
  • GPS (master or back-up)

The obstaflash system dual color or white only provides a day and night marking solution for all kind of obstacle higher than 45 meters as per ICAO (or 61 meters as per FAA). For obstacle below 150 meters the use of white or dual color flashing light medium intensity type A during day time eliminates the need to paint the obstacle with red and white stripes

Effective light output day time at 0° on site
20 000cd (white)
Effective light output twilight mode at 0° on site
20 000cd (white)
Effective light output night mode at 0° on site
2000cd (red) with IR
Color day/twilight time
Color night time
Vertical beam spread
Horizontal beam spread
Intensity @ -10% to the ground
3% of max
Flash per minute
40/30 as per FAA
Main voltage
48VDC -5%/+15% (max current 12A)
Average wattage
55W (day time), 8W (night mode)
IP degree
IP66 per projector
Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature
Tu -40/+55°C
22 kg
Size of the light
333mm (height) x 500mm (diameter)
19kg for flashhead
Cable entry diameter
11 to 21mm
Wire cross section
from 1 to 4 mm²
6 mounting holes dia.16mm, dia.337mm circle (FAA standard)
Standards compliance
ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), UK MOD, Transport Canada
FAA (AC 150/5345-43J), ETL listed, DGAC(France)
Associated Products