White medium intensity system FAA L-865 ETL certified

OFI120-WW-240-U
Part Number 113713UA
OFI120-WW-240-U

3 flashheads OFP-120-RW-10-U with an AC power unit, all including :

  • 3x2 led projectors in aluminium and glass
  • 2 white led circuits and a red with infrared circuit inside each projector
  • NVG visible
  • Simple installation with no losing parts when opening the flash-head
  • Normally open or normally close relay in case of lamp default or power supply
  • Communication capabilities (controller, Modbus TCP)
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • Surge protection with indicator showing when it has failed included
  • GPS controlled or in back-up activated in case of failure or absence of an external controller or/and photocell
  • External photocell
Contact Us
Dual color medium intensity FAA L-865/L-864 including 3 OBSTAFLASH120 flashheads. Comply with ICAO medium intensity dual color type A and B. As per FAA white flashing lights L-865 used for daytime and twilight marking are recommended for obstacle exceeding 61 meters high
Select another reference:
OFI120-R-048
OFI120-R-240
OFI120-R-48/240
OFI120-RW-048
OFI120-RW-048-U
OFI120-RW-240
OFI120-RW-240-UA
OFI120-RW-48/240
OFI120-RW-48/240-U
OFI120-WW-048-U
OFI120-WW-240-U
OFI120-WW-48/240-U
Effective light output day time at 0° on site
 20 000cd (white)
Effective light output twilight mode at 0° on site
 20 000cd (white)
Effective light output night mode at 0° on site
 2000cd (white)
Color day/twilight time
 white
Color night time
 White
Vertical beam spread
 >3°
Horizontal beam spread
 360° with minimum 3 flashheads fixed at 120° around the obstacle
Intensity @ -10% to the ground
 3% of max
Flash per minute
 40
Main voltage
 110VAC to 240VAC +/-10% 50/60Hz
Average wattage
 55W (day time), 8W (night mode)
Wiring
 For each projector, 10 meters of molded cable with connector For power supply, 1 plug per projector + entry of power & signal cable by glands nickel plated brass and connection by terminals
Operating temperature
 Tu -40/+55°C
Size of the light
 120mm (height) x 480mm (width)
Size of the power supply
 400mm (height) x 300mm (width) x 200mm (dept)
Weight
 3,5kg
Standards compliance
 ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), UK MOD, Transport Canada
Certification
 FAA (AC 150/5345-43J), ETL listed, DGAC(Fr)
Associated Products
PHOTOCELL-DC-KIT
SUPPORT OFP-120
UNIVERSAL HOLDER