Reliability in
Obstruction
lighting
OF360-RW-240
Part Number: 113725

Dual color medium intensity type A and B or C

OF360-RW-240

Flashhead

  • 6 led projectors with molded cable & connector
  • Aluminium and glass enveloppe
  • No losing part and no tools required to remove projectors from the flashhead
  • All led drivers and control electronic in the power cabinet, special interconnecting cable between flashhead and power cabinet

Power supply

  • 'Weather tight' stainless steel 316L power cabinet enclosure
  • Test button for remote (photocell), day and night mode
  • Alarm dry contact NC and NO
  • Master/slave configuration in case of multiple lights synchronisation
  • to be used with external photocell P/N100755 and interconnecting cable P/N113762LX (X lenght in meters)
  • in option side lights L810 or low intensity type B for night only operation (or L810(F) 30fl per minute)
  • in option wireless synchronisation by GPS P/N113746, GSM diagnostic P/N113785

The obstaflash system dual color or white only provides a day and night marking solution for all kind of obstacle higher than 45 meters. For obstacle below 150 meters the use of white or dual color flashing light medium intensity tye A during day time eliminate the need to paint the obstacle with red and white stripes

Select another reference:

Effective light output day time at 0° on site 20 000cd (white)
Effective light output twilight mode at 0° on site 20 000cd (white)
Effective light output night mode at 0° on site 2000cd (red)
Color day/twilight time white
Color night time Red
Vertical beam spread >3°
Horizontal beam spread 360°
Flash per minute 40
Mains voltage 110VAC to 240VAC +/-10% 50/60Hz
Average power consumption 55W (day time), 8W (night mode)
IP degree IP66 per projector
Wiring Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature Tu -40/+55°C
Size of the light 315mm (height) x 500mm (diameter)
Size of the power supply 400mm (height) x 300mm (width) x 200mm (dept)
Weight 14kg for flashhead, 10kg for power cabinet
Wire cross section from 1 to 4 mm²
Attachment 6 mounting holes dia.16mm, dia.337mm circle
Standards compliance ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017)
Associated Products