OBSTA STI 48V
Part Number: 113200
Cold neon discharge low intensity type A devoted to the night marking of all kind of obstacles supplied by a standalone DC power source in 48VDC
- Excellent luminous intensity with a vertical beam much larger than ICAO requirement,
- Inherent generation of the «aviation» red,
- Perfectly waterproof, light in hard made in hard glass
- No grounding issue, class II
- All wiring configuration available
- Protected against transient overvoltages
- Alarm by returning +48V in case of lamp failure or low power
Datasheet
The OBSTA STI is a one piece moulded assembly which includes a constant power converter and the proper discharge lamp (5 turns).
The OBSTA STI includes :
- a clear glass envelope,
- a constant-power converter,
- perfect watertightness,
- no requirement for a ground connection, which avoids any voltage return from the earth (for example due to lightning). The overall is thus considerably improved.
The OBSTA STI also includes :
- protection against transient overvoltage,
- circuitry to monitor the operation of the lamp and, in the event of failure, to trigger an alarm or light up an auxiliary lamp (if active redundancy circuits are used).
The OBSTA STI is easy to install and requires no servicing.
Select another reference:
- 24V BATTERY CABINET 40AHSF (INPUT POWER 220VAC)
- 24V OBSTAFLASH Xe CONVERTER
- 48V BATTERY CABINET 12AHSF (INPUT POWER 220VAC)
- 48V-NAV-PW-240
- BALISE HI SS125 230-AC REC
- BALISOR® B33 LAMP
- BALISOR® B49 LAMP
- BATTERIE 12V FM
- CABLE-OFP-6P-RW-10S
- CAPACITOR 100µF
- CAPACITOR 25µF
- CELLULE 500LUX 48V
- CHARGEUR SL 6A 48V
- CLAUDE 5S
- CLAUDE HI
- CLAUDE HIG
- COMMAND CARD 48VDC CRESP NUIT
- COMMAND CARD 48VDC JOUR
- COMMAND-CARD-48VDC-6P-RW
- COMMAND-CARD-48VDC-6P-RW-USA-43G
- COMMAND-CARD-48VDC-6P-RW-USA-43H
- COMMAND-CARD-48VDC-6P-RW-USA-43J
- CONVERTER 230VAC TO 48V-300W
- FAULT TRANSMITTER CARD
- FAULT TRANSMITTER CARD
- GPS-24/48
- GPS-24/48-I-V2
- HRP-150 48
- IMPULSE TRANSFORMER
- K2/4 RELAIS H.T. 77-2013 BHI
- MLPX1-48DC-W/Obsta
- NAV-CMD-48
- NAV-CMD-48-WITH EXTERNAL PHOTOCELL 13133
- NAV-HI-CMD-48
- NAV-HI-CMD-48-WITH EXTERNAL PHOTOCELL 13133
- NAV-JB-3-AL
- NAVILITE B 13950
- NAVILITE-48V-CABLE-1
- NAVILITE-FAA-48V
- NAVILITE-HI-12V
- NAVILITE-HI-230V
- NAVILITE-HI-24V
- NAVILITE-HI-48V
- NAVILITE-HI-48V-CABLE
- OBSTA GSM/GPRS MODEM
- OBSTA STI 10 CD 12-VDC
- OBSTA STI 48V
- OBSTA STIF 12V
- OBSTA-XE-R-24
- OBSTA-XE-R-240
- OBSTA-XE-RW-24
- OF360-RW-240
- OFC-CTR-5E-3F-5A-240-P
- OFC-CTR-5E-3F-5A-240-P-RAL7035
- OFC-CTR-6E-3F-6A-240
- OFC-PCBa-CMD-048
- OFC-PCBa-CMD-240
- OFH-120-WW-240-B
- OFH-120-WW-240-B48
- OFH-120-WW-240-B48-APR
- OFI-CAB-1E-RW-240
- OFI-CAB-1E-RW-240-U
- OFI-CAB-24P-4E-RW-240
- OFI360-RW-240-AOL
- OFP-120-R-10
- OFP-120-RW-10L-U
- OFP-120-RW-2B-HIA
- OFP-120-RW-2L-HIA
- OFP-CAB-8P-L-WW-240-HIA
- OFP-JB-2P-R
- OFP-JB-3P-R
- OFP-JB-3P-RW
- OFP-JB-6P-RW-H
- OFP-JB-6P-RW-L
- OFP-JB-8P-R
- OFP-JB-8P-RW
- OFP-L-MALE-CONNECTOR
- PCB MASTER CARD UNICOLOR
- PCB WITH FUSE FOR OBSTAFLASH XENON
- PHOTOCELL 500/50LUX 120VAC
- PHOTOCELL 500/50LUX 48VDC
- PHOTOCELL 50LUX 120VAC
- PHOTOCELL 50LUX 230VAC
- PHOTOCELL 50LUX 24VDC
- PHOTOCELL 50LUX 48VDC
- PHOTOCELL NIGHT 77-3259 CHI
- PHOTOCELL TWILIGHT 77-3258 CHI
- POWER CARD 48VDC
- POWER CARD B 48VDC
- POWER SUPPLY 230VA 600W
- PROJECTOR-R-0.75
- PROJECTOR-R-0.75
- PROJECTOR-R-10
- PROJECTOR-RW-0.75
- PROJECTOR-RW-0.75L
- PROJECTOR-RW-10L
- PROJECTOR-RW-2B
- PROJECTOR-RW-2L
- Photores
- RED OBSTA XENON FLASHHEAD ONY
- STI-AL-48
- SYNCHRONISATION CARD
- TRIGGER BOARD
- WHITE OBSTA XENON FLASHHEAD ONY
- XE FLASHTUBE DRAWER
| Luminous intensity | > 10 Cd | |
| Color night time | Red fixed | |
| Vertical beam spread | >120° | |
| Horizontal beam spread | 360° |
| Wattage | 12 W | |
| Current drawn | 250 mA | |
| Main voltage | 48VDC (-10%; +15%) |
| IP degree | IP66 | |
| Wiring | On stripped wires 3x1,5mm² (cable lenght 1 meter) (2 power wires, 1 alarm wire) | |
| Operating temperature | Tu | -30/+60°C |
| Size of the light | 420mm (height) x 69mm (over diameter) | |
| Weight | 1,5 kg | |
| Attachment | 2 screws type M8 (provided). Thikness to screw into : 1 up to 5 mm |
| Standards compliance | ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017) |
Associated Products
