NAVILITE-HI-230V
Part Number: 113939
Led low intensity type B compliant with L-810 (FAA 150/5345-43H)
- Completely molded and perfectly waterproof with AC power supply installed below the light
- Bird spike
- No grounding issue, class II
- Total 192 leds wired in 48 independant circuits of 4 leds each
- Luminous intensity 3 times higher than ICAO/FAA
The NAVILITE HI 230VAC P/N113939 should be ordered with its stainless bracket P/N113920 for vertical or horizontal installation as per the drawing below
Datasheet
The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.
Select another reference:
- 24V BATTERY CABINET 40AHSF (INPUT POWER 220VAC)
- 24V OBSTAFLASH Xe CONVERTER
- 48V BATTERY CABINET 12AHSF (INPUT POWER 220VAC)
- 48V-NAV-PW-240
- BALISOR® B33 LAMP
- BALISOR® B49 LAMP
- BATTERIE 12V FM
- CABLE-OFP-6P-RW-10S
- CAPACITOR 100µF
- CAPACITOR 25µF
- CHARGEUR SL 6A 48V
- CLAUDE 5S
- CLAUDE HI
- CLAUDE HIG
- COMMAND CARD 48VDC CRESP NUIT
- COMMAND CARD 48VDC JOUR
- COMMAND-CARD-48VDC-6P-RW
- COMMAND-CARD-48VDC-6P-RW-USA-43G
- COMMAND-CARD-48VDC-6P-RW-USA-43H
- COMMAND-CARD-48VDC-6P-RW-USA-43J
- CONVERTER 230VAC TO 48V-300W
- FAULT TRANSMITTER CARD
- FAULT TRANSMITTER CARD
- GPS-24/48
- GPS-24/48-I-V2
- HRP-150 48
- IMPULSE TRANSFORMER
- JB-PHOTOCELL-12-48V
- K2/4 RELAIS H.T. 77-2013 BHI
- NAV-CMD-48
- NAV-CMD-48-WITH EXTERNAL PHOTOCELL 13133
- NAV-HI-CMD-48
- NAV-HI-CMD-48-WITH EXTERNAL PHOTOCELL 13133
- NAV-JB-3-AL
- NAVILITE B 13950
- NAVILITE-48V-CABLE-1
- NAVILITE-FAA-48V
- NAVILITE-HI-12V
- NAVILITE-HI-230V
- NAVILITE-HI-24V
- NAVILITE-HI-48V
- NAVILITE-HI-48V-CABLE
- OBSTA GSM/GPRS MODEM
- OBSTA STI 10 CD 12-VDC
- OBSTA STI 48V
- OBSTA STIF 12V
- OBSTA-XE-R-24
- OBSTA-XE-R-240
- OBSTA-XE-RW-24
- OF360-RW-240
- OFC-CTR-5E-3F-5A-240-P
- OFC-CTR-5E-3F-5A-240-P-RAL7035
- OFC-CTR-6E-3F-6A-240
- OFC-PCBa-CMD-048
- OFC-PCBa-CMD-240
- OFH-120-WW-240-B
- OFH-120-WW-240-B48
- OFI-CAB-1E-RW-240
- OFI-CAB-1E-RW-240-U
- OFI-CAB-24P-4E-RW-240
- OFI360-RW-240-AOL
- OFP-120-R-10
- OFP-120-RW-10L-U
- OFP-120-RW-2L-HIA
- OFP-CAB-8P-L-WW-240-HIA
- OFP-JB-2P-R
- OFP-JB-3P-R
- OFP-JB-3P-RW
- OFP-JB-6P-RW-H
- OFP-JB-6P-RW-L
- PCB MASTER CARD UNICOLOR
- PCB WITH FUSE FOR OBSTAFLASH XENON
- PHOTOCELL NIGHT 77-3259 CHI
- PHOTOCELL TWILIGHT 77-3258 CHI
- POWER CARD 48VDC
- POWER SUPPLY 230VA 600W
- PROJECTOR-R-0.75
- PROJECTOR-R-10
- PROJECTOR-RW-0.75
- PROJECTOR-RW-0.75L
- PROJECTOR-RW-10L
- PROJECTOR-RW-2B
- PROJECTOR-RW-2L
- Photores
- STI-AL-48
- XE FLASHTUBE DRAWER
| Luminous intensity | >90 Cd | |
| Color night time | Red fixed | |
| Vertical beam spread | >10° | |
| Horizontal beam spread | 360° |
| Wattage | 12 W | |
| Current drawn | 200mA | |
| Life time | ~10 years | |
| Main voltage | 230VAC +/-10% |
| IP degree | IP66 for the light and IP65 for the power supply | |
| Wiring | Terminal connection (2 power wires) | |
| Operating temperature | Tu | -30/+60°C |
| Size of the light | 194mm (height) x 63mm (over diameter) | |
| Weight | 950 g | |
| Cable entry quantity for power supply | 2 | |
| Wire cross section | from 1 to 2,5 mm² | |
| Attachment | 1 screw M5 provided |
| Standards compliance | ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017) |
Associated Products
