Reliability in
Obstruction
lighting
NAVILITE-HI-48V-CABLE
Part Number: 113935

Led navilite low intensity type A and B

NAVILITE-HI-48V-CABLE
  • Completely molded and perfectly waterproof
  • Bird spike
  • No grounding issue, class II
  • Total 192 leds wired in 48 independant circuits of 4 leds each
  • Luminous intensity 3 times higher than ICAO/FAA requirements

For vertical or horizontal installation, the stainless bracket P/N113920 as per drawing below should be added


The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.


Luminous intensity > 35 Cd
Color night time Red fixed
Vertical beam spread >10°
Horizontal beam spread 360°
Max power 12 W
Current drawn 250 mA
Life time ~10 years
Mains voltage 48Vdc ± 10%
IP degree IP66
Wiring On stripped wires (molded cable lenght 35cm) (2 power wires)
Operating temperature Tu -40/+55°C
Size of the light 194mm (height) x 63mm (over diameter)
Weight 950 g
Attachment 1 screw M5 provided
Standards compliance ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017)
Associated Products