Reliability in
Obstruction
lighting
NAVILITE-HI-230V
Part Number: 113939

Led low intensity type B compliant with L-810 (FAA 150/5345-43H)

NAVILITE-HI-230V
  • Completely molded and perfectly waterproof with AC power supply installed below the light
  • Bird spike
  • No grounding issue, class II
  • Total 192 leds wired in 48 independant circuits of 4 leds each
  • Luminous intensity 3 times higher than ICAO/FAA

The NAVILITE HI 230VAC P/N113939 should be ordered with its stainless bracket P/N113920 for vertical or horizontal installation as per the drawing below


The NAVILITE HI series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed for new installation or to replace incandescent obstruction lights or for new installation. Its luminous intensity is much higher than the ICAO and FAA standard. The NAVILITE is one piece molded which integrates 12 levels of 16 LED and comes with wiring connectors or a molded cable.


Luminous intensity > 90 Cd
Color night time Red fixed
Vertical beam spread >10°
Horizontal beam spread 360°
Max power 12 W
Current drawn 200mA
Life time ~10 years
Mains voltage 230VAC +/-10%
IP degree IP66 for the light and IP65 for the power supply
Wiring Terminal connection (2 power wires)
Operating temperature Tu -30/+60°C
Size of the light 194mm (height) x 63mm (over diameter)
Weight 950 g
Cable entry quantity for power supply 2
Wire cross section from 1 to 2,5 mm²
Attachment 1 screw M5 provided
Standards compliance ICAO annexe 14 chapter 6 (7th edition 2016), EASA (4th edition 2017)
Associated Products