Red fixed low intensity type A and B

NAVILITE-240I-KIT

Part Number 113909I-KIT

The reference 113969-KIT include the Navilite lamp (113969) with a stainless steel bracket and cable gland (113928)
Light part completely molded with 4 levels of leds
Redundant circuits for LED’s : 16 circuits of 4 LEDs in redundancy
Surge protection and alarm included inside an aluminum red painted base
normally open and normally close both available for the alarm in compliance with FAA Engineering Brief 98
Provided with stainless bracket for mounting and hot-galvanized cable entry
Molded design with no loose parts during installation

The NAVILITE series are dedicated to night marking of any kind of air navigation obstacle such as wind mast, towers, cranes, building... The NAVILITE has also been designed to replace incandescent obstruction lights or for new installation. The NAVILITE is one piece molded which integrates 4 levels of LED and comes with wiring connectors or a molded cable.

Select another reference:

Electrical Properties Mechanical Properties Norms Photometric Properties

Luminous intensity		> 32cd
Color night time		Red fixed
Vertical beam spread		>10°
Horizontal beam spread		360°

Wattage		6 W
Current drawn		70 mA
Life time		~10years
Main voltage		110VAC to 240VAC +/-10% 50/60Hz

IP degree		IP66
Wiring		On stripped wires 3x1,5mm² (2 power wires, 1 ground wire)
Operating temperature	Tu	-40/+55°C
Weight		0.92 kg
Size of the light		Ø x h :63 x 169 (mm)
Weight		950 g
Attachment		1 screw M5 provided

Standards compliance

ICAO annexe 14 chapter 6 (8th edition 07/2018), EASA (4th edition 2017)