This IOT gateway is designed to monitor and control OBSTA lights medium and high intensity only remotely on a dedicated web server. This IOT gateway is compatible with most of aviation warning lights on the market This controller allows to have a diagnostic remotely on a web server
Part Number: 114804-18
OBSTALINK-CAN
- Centralized Management: Enables maintenance, configuration, installation, and administration on a single site for up to 64 OBSTA day and night lights via CAN bus, using a single control cable connected to the OBSTA cloud.
- Power Monitoring: Monitors beacon power sources from solar kits or power cabinets (12Vdc, 24Vdc, or 48Vdc).
- Precision Diagnostics: Detailed diagnostics for every LED circuit within each light.
- Real-time Telemetry: Tracks temperature, humidity, status, and configuration for every light.
- Remote Management: Adjustable alarm thresholds and remote firmware updates for beacons.
- External sensor: Capability to connect a day/twilight/night photoelectric cell.
- Robust Housing: Housed in a painted aluminum enclosure with nickel-plated brass cable glands.
- Lightning Protection: Integrated surge and lightning protection.
- Connectivity: * 4G LTE Modem with SIM card (MQTT support).
- RJ45 Port, IPv6 supporting Modbus TCP and MQTT.
- ADLS Ready: Fully compatible with Aircraft Detection Lighting Systems (circumstantial marking for wind turbines).
IOT gateway for OBSTA low, medium and high intensity obstruction lights with CAN-BUS operating between 10VDC to 60VDC
Datasheet|
Main voltage
|
90VCA to 277VCA 50/60Hz & 10VDC to 60VDC |
|
IP degree
|
IP65 in vertical position |
|
|
Weight
|
5 kg |
|
|
Cable entry diameter
|
from 8 to 15 mm |
|
|
Wire cross section
|
from 1 to 4 mm² |
|
|
Attachment
|
4 screws type M5 |
|
Standards compliance
|
EN 18031-1 |
Select another reference:
